Run 2wd. 4x4 is flatter since it doesn't need to kick up as far to clear the axle. That means you can run 2wd exhaust on a truck that's been...
Gonna have to disagree with this. The aftermarket Dorman ones are hot garbage but I've had great luck with the OEM stuff. Pro tip: Skip all the...
[IMG] [IMG] I finally got around to throwing on the BBS meshies I've had sitting in a corner of the shop for months. They came off of a 1991...
Yes, correct, by eliminating the PCV as well as the intake you remove the problem of unmetered air and are only left with the issues of power loss...
Oil leaks are the least of your worries. The reason no one runs them on the EFI is because it is a mass air system. A breather draws unregulated...
Should sit far higher than that with cranked torsions. Do you have any pictures of the spindle/ball joint? I'm betting you've got BJs flipped or...
O2 sensors are easy to do with this setup. When I converted to the twin-tube downpipe I moved the front O2 sensor up into the manifold where it...
Dumped the pics off my phone and found something that might make useful tech for someone on here. If you want to replace an old rusted exhaust...
Glad to see someone giving it a shot. I've been very happy with this swap over the past year! Funny you should ask. I took a photo after I did...
You can pull the nuts off of the master and slide it away from the booster without undoing all the lines to easily confirm your diagnosis, but if...
I'm looking for someone with a busted or partial SR5 cluster for a thirdgen (90's) truck that I can rob for parts. Specifically I need a working...
Easy yes, but bumpsteer sucks, especially if you commute on the freeway. I'm about to flip mine back. Even with a brand new steering damper it's a...
Airshocks should be plumbed equally. Splitting the system is asking for a dangerous ride as YoguyDa has illustrated. Whatever problem you have is...
Separate names with a comma.