Anyone put a 22re into a 75-78 and find a set of long tube headers that fit and don't end under the trans cross member?
I figured it out. Its 1/8 28 bsp
I measured the size and pitch and came to 3/8-28
It has a connector but im trying to use a plug to plug the hole cause the sensors are ugly
Trying to delete the sensors on the bottom of the brake master. Tho i just realized i didnt look far enough into the tread pitch.
I took the master cylinder to ace hardware and wasn't able to find the right pitch.
Does anyone know the thread pitch for the 2 brake pressure switches on the bottom of a 1975 pickups master cylinder.
Just read up on it, needs to be swapped to an IRS or bent axles. But an IRS is the best idea
Im pretty much trying to find at least another inch out of the rear without running a 5" block
I thought they were a different length.
Currently my front is lowered with might max lowering springs and the rear is 4" angled blocks with a leaf removed. I know that there is a...
Separate names with a comma.