TDC

Discussion in 'Maintenance/Repair' started by Houa Thao, Jan 11, 2016.

  1. Houa Thao

    Houa Thao Enthusiast

    Joined:
    Jan 30, 2011
    Messages:
    252
    Likes Received:
    4
    Location:
    Sacramento, ca
    Truck:
    91extracab
    A ? To all those who have been through the timing chain replacement. When I got to setting it to TDC I notice if it us align at top bottom mark is no at 0. If it is at 0 on the pulley the top mark(dot) is off .
     

    Attached Files:

  2. White Trash

    White Trash Toyotaholic

    Joined:
    Jan 26, 2011
    Messages:
    1,745
    Likes Received:
    74
    Location:
    Eastern WA
    Truck:
    89 auto cross beater
    Timing mark on the balancer at 0* will have the key in the crank at the exact 12 0'clock. Line up the cam timing mark/pin just slightly to the passenger side.
     

Share This Page