whats up everyone, my name is samuel. i have a '94 toyota extended cab pickup. so far i have 3 inch lowering blocks in the rear, my torsion bars are cranked down about 1/2 to 1 inch to the top of the bolts. right now i have the front in primer, have the hood squirters shaved, and the antenna shaved. i dont have the bed in primer because it has too many dents, so i found a guy that has a bed for it for 25 dollars. floor already cut for c-notch and everything. ihave 18 inch panther rims, i beleive they are the 395s. i have two 10 inch Kicker CVRs in a ported box, with a 1000watt pyramid classic amp, and i have four blue neons two under the dash, two in the back above the enclosure. the engine has just had the head gasket replaced. i also painted the upper intake blue, and the valve cover blue. i have a cold air intake, and a glasspack on it so far, i am planning on building a custom header soon. the pic are the truck before i primed it, while i was workin on the head gasket, the valve cover and the upper intake, and the front end in primer.
Welcome to the forum! Cool truck and super lucky find about the bed! I've been looking for a good deal on an 89-95 bed for months now. You scored!
yea, i even got the truck for free, i guess thats the perks when ur old ladies dad owns a shop, get to use a bay, lift and whetever i need so its pretty good, most of the work i have done on my own, but a couple things i had a friends help with, like my racing seat i had help fabricating brackets to mount the sliders on, but i hope to get the bed soon.
