I was wondering who has the most inexpensive 4" lowering block kit for sale. I searched this forum for a while and couldn't find any prices.

Thanks guys!

 

This is what you need to go with, might not be the cheapest but you'll get a quality product.

Hope this helps,
Good luck

LB1023-4 | DJM Suspension | DJM Suspension

 

Beefed nuff said! Ha that's probably what ur gonna hear from everyone here I wanna say they r about 60 bux. He also sells low pro bumpstops which u might need if u don't have a notch.

 

Could I use these blocks on a first gen??

 

i don't see why not.

 

I would use a tapered block such as beef tacos product his blocks correct pinion angle
And help the u joints keep a normal alignment reducing vibration and mechanical failure .

 

Where can I find these all I run across are other forums talking about these blocks

 

Here is Beef taco's homepage:
Home

Here's the specific kit you are looking for:
BLOCKS / 1/2" GRADE 5 U-BOLTS / 04 & OLDER TOYOTA 5 LUG TRUCKS

 

I just found them a few min ago when I came across these belltech springs people are using to lower there first gens.

 

you can also get them at autozone for 35ish but the u-bolts are doo-doo. and they don't always have the 4"

 

Come onto the forum to ask the same question today and BAM its right there on my homepage
Mission accomplished

Thanks guys!!!

 

you're welcome!

 

So the 5" tapered will hive me a 4" drop and correct the angle??

Also does anybody know if I'm running 195/75/14 wil I rub in the back?