I'm new to the forum but I've been a proud owner of a 91 Toyota Pickup for 6years now. Recently my poor truck was involved in an accident while parked out in the street in front of my house. My douche bag neighbor was driving drunk with a beer in his hand in reverse and plowed into my truck. Now that being said. I'm lucky because it has no frame damage just have to replace RH wheelhouse, radiator support, fender, bumpers, grill etc. I'm interested in doing the 4wd frond end conversion. If I do this conversion will I be able to run a larger wheel than the 14X6 stock steelies. I have a set of 15X7 5 by 4.5wheel I came across for real cheap. Could I run a 195/70 or 195/65-15 tire on it and not rub the 4wd bumpers and fenders? Also these wheels have 3.75 inch backspacing and -6 offset, they clear the upper ball joint. But will this difference cause damaging wear on the wheel bearings? Sorry about the long story and I hope I posted this in the right area.