Engine ground wires

Discussion in 'Engine/Drivetrain' started by 93TILinfinity, Jul 6, 2014.

  1. 93TILinfinity

    93TILinfinity Veteran

    Joined:
    Mar 13, 2014
    Messages:
    305
    Likes Received:
    3
    Location:
    Lake Elsinore, CA
    Truck:
    1993 Toyota pickup 2wd 4cyl 5speed cab and a half standard bed
    My j hook snapped off the bracket hit positive. Fried my wires. I replaced the wire that goes from the body to the battery and the one in the back of the engine bay to the engine. Am I missing any other wires?
     
  2. Litneon

    Litneon Super Moderator Staff Member

    Joined:
    Mar 29, 2007
    Messages:
    2,414
    Likes Received:
    50
    Location:
    Cocoa, FL
    Truck:
    94 xtra cab
    Hmm. Runs in my mind that there is one that runs from the battery to the chassis too. But, I've changed mine around, so I can't remember for sure. I have a large ground from the battery to chassis, then from the chassis to body, then one from the chassis to the block, then body to head.

    Bonding is never a bad thing to add.
     
  3. 93TILinfinity

    93TILinfinity Veteran

    Joined:
    Mar 13, 2014
    Messages:
    305
    Likes Received:
    3
    Location:
    Lake Elsinore, CA
    Truck:
    1993 Toyota pickup 2wd 4cyl 5speed cab and a half standard bed
    Bonding? Sorry I'm a newb. Thanks for the input I'm trying to find a diaphragm or so.
     
  4. 93TILinfinity

    93TILinfinity Veteran

    Joined:
    Mar 13, 2014
    Messages:
    305
    Likes Received:
    3
    Location:
    Lake Elsinore, CA
    Truck:
    1993 Toyota pickup 2wd 4cyl 5speed cab and a half standard bed

Share This Page