Asking 2500 obo without chrome rims, I’m selling my daily driver. It’s an 86 Toyota Pickup. In the front it has 2’’ Beltech drop spindles and Slam Specialties bags. In the rear it has a forward triangulated 4-link and Slam Specialties bags. The rear bags are mounted on the lower link bars for more lift and a smoother ride. The rear axle also has a Lockrite Locker in it. The truck lays frame on a 215/35/18. It currently has a set of Chrome 18'' rims on it. It would lay out on 20s with a 225/30/20 tire with about an inch of firewall clearance. Air management consists of 8 half-inch SMC valves (FBSS) with all half-inch airlines. 2 Viair 380 compressors, 1 eight-gallon tank, 2 SMC water traps. And air gauges in the cab for the tank and all corners. The bed is body dropped to keep everything hidden under the bed floor. (Its 80% done only a couple fillers needed to fully finish it) The dash is wrapped in Black vinyl and all other peaces are sanded smooth and painted black. The motor has a fresh head gasket, head bolts, timing chain and tensioner. I also cleaned the head up when I had it off. The motor leaks no oil or any fluids for that mater. The motor is strong and runs great. (175,000 miles on the motor. I did all the work on the motor at 172,000 miles) This truck is no hack! I have built many bagged rides and this truck is built to drive daily with no problems and last. I’m asking 2500 obo without chrome rims. Hit me up and give me an offer. I have lots of photos of the truck and pictures during the bag job. If you are serious buyer ill send em to you.
Practically giving it away is right! With that list of parts and the amount of time you must have into it... That is a deal!!!
Im not looking to trade. I need the cash bad. if I lived in CA or AZ this thing would be long gone but bagged trucks just dont sell in utah.
i'll buy it but with the rims... or lower the price... p.s i live in nor-Cal, so i would be driving to utah or towing it over.. =/ Actually its only 12 hours here to there, so its not to be bad.. where in utah you from?
That's awesome. I'd be on it if I didn't just pick up my '71. Where in Utah are you? If you're close I'd like to see it in person and see your 4 link work.
he lives kinda by me ive checked this truck out before, verry nice work i must say. Good luck selling man if i didint alreddy have my project going i would have picked this up.
Utah huh Whats the price with the rims? Can you post pics of it raised along with pics of engine and bed?