Looking for some screws that hold the inner "double" wall liner in place. I am removing mine to inspect and paint and some are snapping like twigs on me. Any help is appreciated.

22R88

 

I assume you are talking about the bed? On my 88 ( don't know if other years) they are 5mm in size & I'll have to review my notes or measure the thread count!

 

Yes the screws that hold the wall liner to the bed.

Thanks for the reply
22R88

 

5mm /.080 thread pitch,don't have a length ,as made stand off's with the stock thread on one side & 1/4'x20 on the other & changed to all stainless button heads ( not stock side panels)!

 

inner bed wall

I used my old rusty inner bed wall as a template for a new diamond cut wall. I took the old screws with the size 10 or 12 head on them to the nuts and bolt section in the hardware store. They matched them but with a philips rounded head. turned out really nice.