79 lowering questions.

Discussion in 'Suspension/Chassis' started by calknowles, Apr 4, 2011.

  1. calknowles

    calknowles Newbie

    Joined:
    Apr 4, 2011
    Messages:
    6
    Likes Received:
    0
    hey guys im from australia. i was wondering if anyone makes drop spindles for the 79 long beds?

    i want it maybe 70mm from the rails to the ground and will have either 14" rim with a 60 profile or a 15" with a 50 profile. will the chassis need to be z'ed at the front and back or only the back?

    how do you recommend getting it this low?

    thanks alot callum:bowdown:
     
    calknowles, Apr 4, 2011
    #1
  3. Twisted Minis

    Twisted Minis Addict

    Joined:
    Nov 28, 2006
    Messages:
    808
    Likes Received:
    1
    Location:
    Poor Cal
    Truck:
    1980 Toyota
    Twisted Minis, Apr 5, 2011
    #2
  4. calknowles

    calknowles Newbie

    Joined:
    Apr 4, 2011
    Messages:
    6
    Likes Received:
    0
    so i pretty much need to get 84+ lca/uca brakes calipers and run 84+ drop spindles..no1 makes spindles for earlier models i guess.:cry:
     
    calknowles, Apr 5, 2011
    #3
  5. oahu grown

    oahu grown Toyotaholic

    Joined:
    Apr 28, 2009
    Messages:
    1,979
    Likes Received:
    0
    Location:
    Hawaii
    Truck:
    92 Extra Cab
    Cut coils or go look for the thread with the mitzu coils.

    Its not spindles but it will make you low.
     
    oahu grown, Apr 5, 2011
    #4
  6. calknowles

    calknowles Newbie

    Joined:
    Apr 4, 2011
    Messages:
    6
    Likes Received:
    0
    yeh saw that thread...will i need drop spindles to get as low as i want?
     
    calknowles, Apr 5, 2011
    #5
  7. Twisted Minis

    Twisted Minis Addict

    Joined:
    Nov 28, 2006
    Messages:
    808
    Likes Received:
    1
    Location:
    Poor Cal
    Truck:
    1980 Toyota
    79 has torsions, not coils. No one makes spindles for them, you have to adapt everything over.
     
    Twisted Minis, Apr 7, 2011
    #6

Share This Page