I have a RARE TRD Clutch setup. I purchased this through my parts dept and find out that it will not work on my truck. I have a 1987 TURBO 2WD truck. This clutch is NEW in original packaging. Includes Plate, Disc, and TO bearing.
It will work on all 2wd/4wd trucks with the 22r motor. Will also work on some Celicas. I would like to get $165.00 shipped. This is a great deal for anyone needing a clutch. Has about 35% more grasping power than stock and its a pretty easy clutch on the foot. I had one with an HKS flywheel setup on my 1990 2WD truck and was very pleased. Any questions please email me direct to [email protected]

I also have a fan and clutch setup for any 22r....CHEAP
Lower REAR shock mounts...powder coated black....NOT FOR TURBO applications
with new shackles included...CHEAP

 

Will it work with factory flywheel?
How much power can it take?

 

there are really only 2 different clutches for the 2xr family.


1 for NA
and
1 for the 22ret



this will work on any 2xr powered vehicle (celica, corona, pickup, 4x4).

the 4wd clutch has a slightly thicker disc and will also work in anything other than a 22ret. i replace the stock one with the 4wd on everything i got.

 

pics of the fan please ? mines squeakssss

 

yes it will work with factory flywheel. It is about 30% stronger than original. In my opinion better than the CENTERFORCE II clutch setup. I have used all three on my previous truck with different setups. I actually like the TRD first, the stock setup second and centerforce last but thats me. I also used all three with a 9lb HKS Flywheel and didnt much like that setup so I went back to stock flywheel. Truck was setup with LC Engineering headers, Downey Offroad intake, bigger throttle body, bigger injectors, 2.5" exhaust and although not the fastest it was pretty quick. So answer to your question is yes it will work with factory flywheel

 

fan is clean, i have no pics, it looks just like a factory one. the fan clutch is the same size wise but i think heavier duty due to turbo. I no longer am using this fan, Make offer and its yours, i just want it out of my garage

 

I thought this sold on ebay already... That's why I never got back to you... Any chance you still have that HKS flywheel too?

 

I had a non paying buyer on EBAY. So i got stuck with it AGAIN. I am done with EBAY. So if you want it you can have it $140.00 shipped TODAY. I am needing money to rebuild my turbo motor. My project is now moving faster than I thought after 4 years. GO FIGURE

No, I no longer have the flywheel. And to be honest with you unless you have a real BIG turbo setup I dont think a lightened flywheel is the best way to go. I am using a factory flywheel on my truck.

Let me know

 

Will get back to you on that in a couple of days. Got something that came up.

shooootz!

 

pics of the fannnnn ?? ? lol i need this fan. thnks