Well, I found out that my 06+ Civic 16's wouldn't work on the front of the truck last Friday, so I ended up ordering a pair of Explorer 16's to...
I'm just running my lines through the frame. you have holes in the frame at all four corners, which makes it MUCH simpler to run AND route the...
Jeebus joints are effectively multi-part spherical bearings used in place of ball joints. It seems to me that you get the extra travel and you...
That was one of my thoughts. If I ever go coilover, it would be SUPER easy with these arms and the factory upper shock mount(after getting rid of...
that pivot point is a stepped solid metal tube(with the hole going through it for the bolt. The thinner part has to be inserted into the frame...
Ok, what exactly is it you need? Is it a metal sleeve that sits in the bushing on either side of the upper arm? If so, I just pulled all 4...
So that bar only serves to protect the tranny, which is above frame level anyways? It doesn't reinforce/stiffen the frame or anything like that?...
Ok, this is how it goes on. Makes sense to me now. Including a fairly large pic. If you look REAL close you can also see a little bit of my 140...
Okay, I have a full set of mmw jeebus arms and belltech spindles for my 92. I've got the passenger side of the suspension pulled already, and I'm...
I was considering throwing my wheels and tires off the car(REAL Saleen chrome 5 spokes) on the truck, but I don't want to fit 18x11's on the back...
Okay, I got me some MMW jeebus joint arms, belltech spindles, ss-6 bags, and all sorts of tie-rod bits to swap out this weekend. That said, there...
Have I seen pics of you autocrossing the truck? If I were autocrossing one of these, 105 would be an acceptable top for me. How is your mileage?
Emailed a guy who owns a VERY reputable shop that is about 3 hours from here about possibly redoing the front end for me, doing shocks on the...
I looked at my truck in mild disgust. I want to ride, but I also want to be lazy. And lazy usually wins. Until 2am when I carry myself outside to...
Took the truck on a trip to the local comic store yesterday(I have a 40 title a month pull list. Yes, I have a problem). As I'm pulling in, the...
Changed my brake master cylinder. Seems to have fixed my brakes. Was able to cap the lines with some hyrdaulic caps that I SEEM to have found......
Trying to decide between taking these new bag plates, factory ball joints,and factory lower arms and use that to redo my front suspension and save...
If you go with drop spindles up front, you can keep using them if/when you bag it. They are the more expensive route for the front, but they are...
Bought more parts. Now in addition to the 4 tie rod ends, drop spindles,a ss-6 bag (boy does the drivers side sit higher at full inflation) for...
Well, I decided against going with tubular arms from CanDo. That was the plan from the beginning, as for now I'm just trying to get this truck...
Separate names with a comma.