https://imgur.com/a/D3ztY My daily driver for the better part of five years. Had to retire her, new profession… New demands. Coastie… Body is...
Bought my 78 long bed 5 years ago before moving to the Ocean.. needless to say it's really taken its toll on my baby. I'm going to need...
If not sold in a couple months I maybe interested. My coastie 78 is rusting out. I'll keep checking back.
I've seriously pondered this issue myself for quite a while. I would say find a way of separating the lower panels (The ones you're going to fix),...
Iggy shorted and fried my coil. Time to replace both. Anyone have a spare laying around? Can pay. 707-666-7900 707-397-1490 work (10-6...
Possible voltage regulator?
I'll check that. Tested coil again tonight with Multi.. Within tolerances but I can hear sloshing if I shake it... Shouldn't hear sloshing right?...
Truck died on the highway, 0 reading from contacts in distributor cap via ohmmeter/multi, no spark coming from new ignition coil. Replaced rotor,...
when you were troubleshooting (before pulling the tank).. did you detach the oil pressure sensor and listen for the pump?
Update: lol... massive fuel leak in the carb. I think it's the power valve assembly.. i had a hard time tightening it down and i think it's...
Well, I popped open the bottle of scotch tonight. After a little starter fluid and some spilled gasoline, 3 cigarettes and some head scratching I...
my parts are coming today so i'll do some more tinkering and see what else i can think of
From what I remember I don't think it is.. with a fitting like that there are 2 possible orientations, 1 of which won't work. have you checked...
fixed it! hehe. went to the hardware store and got a gasket sheet. I cut it somewhere around 72mm I.d. and it sits on there nice!
I tried to replicate the symptoms you're having today and found that when the choke thermostat is turned too far open (towards you with the choke...
you know.. i just realized something.. let me upload a pic and 'splain. [IMG] It might be the spring if that top plate on the air horn is loose....
anyone have a part number or general link to a 3" inside diameter gasket that fits between the carb and air cleaner? Can't seem to get any hits...
mine was doing the same thing - so i'm rebuilding the whole carb. I'm not sure if it's going to solve the cold-start issue but i'll get back to...
it's easy and relatively safe. I just had mine off for a bit to re-seal it and adjust the valve clearance... Just make sure you get a new valve...
Will do.. off the top of my head though.. I can speak of "toyotapartseast.com" SLOOOOOOW. been about 2 weeks since I ordered and they still...
Separate names with a comma.
