Chris, Something has to have jammed the cam to break that timing chain. Whether its slack valve timing or something else. I have no idea what the...
if it ran well for 115 miles. Now wont after a valve adjustment you have the answer. The work last done on the engine is the problem. I would say...
Yea Perkolator I was thinking of starting to soak the hanger stuff in PB Blaster. Hoping not to have to do any cutting. The tire has been up there...
Good idea on the vice grips jetas, I will give that a try. After looking at the manual I am missing the T but found a new one on epay for twenty...
Poking around in our 88 single cab I found the original jack in its holder and the long extension with the hook end hanging on clips behind the...
I agree with skid. One of the first things to do on these old wiring systems is to go through and clean all the electrical connectors first so all...
Without being there anything would be a guess as to what's exactly happening. Cleaning all the grounds on my 88 22re did wonders for the starting...
First I would check the oil for any water. Then pull the spark plugs look at them to see if they are burning anything but gasoline. Along with...
The covers are NLA from Toyota, says two local dealers ( Hollywood and Hamer Toyota). I did find a gray set on epay that should be here Saturday....
Check out www.TonneauCoversworld.com Not gonna be cheap but they have good quality stuff. If they don't list what you have pictured in your head,...
Thanks I never thought about a jig saw. I think I have found online a lower cover in blue and an upper cover in gray. If I can find out from the...
I will give that a try first. One online Toyota parts seller listed them as no longer available. But it cant hurt to check at my local dealer....
I have an 88 22re auto. The plastics around the column shifter are really brittle and cracked from spending all its time in the southern CA sun...
What did you end up doing Frinzo and how did it turn out. I have an 88 that needs some interior plastic trim replaced Would like to keep it the...
Yes, you can measure the bolt size and thread per mm. Then look it up on a chart found online as 90daily has done for ya. That should keep the cab...
I would think vacuum leaks would make it shake at idle and lessen with more RPMS. Have you looked at the crank pulley to see if its bent or loose.
Listen to LVS. The only way to tell what's happening with your A/C system is to use gauges. Otherwise its gonna get expensive fast guessing and...
Separate names with a comma.
