Run 2wd. 4x4 is flatter since it doesn't need to kick up as far to clear the axle. That means you can run 2wd exhaust on a truck that's been...
Gonna have to disagree with this. The aftermarket Dorman ones are hot garbage but I've had great luck with the OEM stuff. Pro tip: Skip all the...
[IMG] [IMG] I finally got around to throwing on the BBS meshies I've had sitting in a corner of the shop for months. They came off of a 1991...
Yes, correct, by eliminating the PCV as well as the intake you remove the problem of unmetered air and are only left with the issues of power loss...
Oil leaks are the least of your worries. The reason no one runs them on the EFI is because it is a mass air system. A breather draws unregulated...
Should sit far higher than that with cranked torsions. Do you have any pictures of the spindle/ball joint? I'm betting you've got BJs flipped or...
O2 sensors are easy to do with this setup. When I converted to the twin-tube downpipe I moved the front O2 sensor up into the manifold where it...
Dumped the pics off my phone and found something that might make useful tech for someone on here. If you want to replace an old rusted exhaust...
Glad to see someone giving it a shot. I've been very happy with this swap over the past year! Funny you should ask. I took a photo after I did...
You can pull the nuts off of the master and slide it away from the booster without undoing all the lines to easily confirm your diagnosis, but if...
I'm looking for someone with a busted or partial SR5 cluster for a thirdgen (90's) truck that I can rob for parts. Specifically I need a working...
Easy yes, but bumpsteer sucks, especially if you commute on the freeway. I'm about to flip mine back. Even with a brand new steering damper it's a...
Airshocks should be plumbed equally. Splitting the system is asking for a dangerous ride as YoguyDa has illustrated. Whatever problem you have is...
Robert M is absolutely correct about the right way to determine optimal pressure for a given scenario. After some experimenting you will find...
I'm at a point where I don't think it's a good idea to ever run dino 5W30 in anything ever anymore. After 2500-3K miles it comes out like water;...
First step is to confirm that the cold-start sensor is closing, then check for proper flow at the injector itself.
Tank data doesn't mean much since you aren't filling it up from the same point each time. Track actual fuel pumped and actual miles traveled (not...
I have never seen anything positive come from washing an engine in a vehicle, and I am baffled at how it continues to occur. The best practice...
Correct. Reread the second paragraph of my second post for the explanation. You are loosening the hold-down bolt too much and moving the...
I have Monroe 727s on mine and have been pretty happy with them. Air shocks transfer part of the load off of the spring and onto the shock mount....
Separate names with a comma.