Suspension/ steering parts braking , would be very lucky if you make the road side!!! Life/ death kind of stuff!!!:o
Welcome---84---88 ---best looking body lines!!! And once you start lowing them , they are never low enough until sitting on the frame, & than its...
Looks great ,& I 3rd on the now color!!:cool:
Welcome! The early trucks are pretty cool! Now slam that ride!!!:cool:
Looks good,& you will like it slammed! I recommend you use dropped springs over a mono leaf set up! And you'll will find that you will need a...
I went away from my Yellow Top ( had from 4 years), if the voltage ever goes bellow 10 volts only way to recharge is @ 2 amps for 72 hours!! No...
Well my battery took a dump after only 3 years. Odyssey PC1500, 4 year full replacement is being stood by. Went to start & only 5.6 volts after...
Center bearing @ drive shaft ( if a 2 piece shaft) & check the u-joints @ the same time!!:cool:
Got all the parts & up & running. Fill up seems slow so guessing the motor ( pump) is worn out! Will go with a rebuild kit, way less than...
Measure the lift & drop ( extended & compassed) ,that is what you need. KYB'S are good , I have been running Doestech's for years now!! :cool:
If you do all correctly it will handle just fine! When I was static dropped my handling was great ,as is now with it bagged!! 2'' dropped...
Will after 12 years of running one hell of a lot,my compressor developed a leak,more than one! Ordered most of the items needed , the switch/...
Welcome!!:cool:
Mig w/ gas --220!:cool:
Don't worry, drink a few beers & all will feel OK! On the serious side, should not be a problem if sort time before right tires are on &...
Take it off & put a adjustable valve on!:cool:
You can just bag the rear. I did the rear before the front! You will have to install a notch,not just a c- cut into the frame,a full notch . I...
1) Low trucks & cars look better & handle better. 2) If static dropped ( and most of us start there) you run into the problem of bottoming out...
Got the upper a-arm off ,lower ball joint, & spindle,now off to the wrecker to get a spindle,& Napa for the rest of the parts. try to get all back...
Have to stop the work I'm doing on my truck & work on the wife's Mountaineer! Lost a wheel bearing the other day& to make matters worse,have to...
Separate names with a comma.
