Rear Swaybar Here's what I came up with a while back in regards to adapting the weird bassackward fitting Addco rear sway bar on YankeeTaco72's...
For anyone who comes accross this old thread, I have front low profile bump stops for 95 and earlier trucks now too and they will replace the tall...
Wow, he's stoked, now he can get a 2 pack of beer or a hamburger minus the fries and drink. :evil: Still $5 more than most would do these days....
A 60 series sidewall will have a lot more slop than a 40 series or something in that range. You can feel the difference in the way the truck takes...
Good news! Sounds like you went to the right place, and you still have beer/soda $. :waytogo:
Low pro tires and wheels are going to give you the best bang for the buck. Then get some new quality shocks...like KYB Monomax.
Bagging isn't in a lot of people's budget. You have a couple options...go static, but get rid of all the tire fender gap by doing the b/j flip and...
I think any one of us who's worked on something has done it too...reminds me of when I took my cowl screen off so I could oil my wiper arm to get...
Basically you have 3 options... 1) Find a reputable drive line shop (probably the best end result since they'll balance it too) 2) Salvage...
Lowering will quicken the response of the rear brakes, lifting will lessen the response. When you lower, the valve thinks there's a load in the...
Rule of thumb on shackles is you get half of what you add or take away, since you're only lifting or lowering one end of the leaf. Example: On...
I make a lot of lift shackles for 04 & earlier Toyota trucks and the new Tundra, and the other day I took a look at the shackles on my 99 Taco...
If I remember correctly, the gears in a high pinion diff contact on the back side of the teeth, the weak side. It's been a while though, I could...
I like! :waytogo:
Looking good Dustin! Here are a few pics from the build... The issues... 3" Belltech leafs and 3" blocks had this truck rubbing the drive...
Thanks, me too! Yes sir...I had no idea since the paper work and box didn't say, but I was schooled on FR500's over on CT.:waytogo:
I have Replica Cobra wheels on my 99 with a 89 axle. Hub hole worked fine, the specs are 18x9 +36 (offered in 18" and 19" diameter and 9" & 10"...
Yeah if you just can't get it to loosen, your best bet is to get a nut and have someone zap it onto the plug. You can try a hammer and centerpunch...
I had to weld a nut to the plug so it could be removed on a old Toyota truck. Worked great. The axle is completely separate from the trans. To...
Somebody just bought one of these this morning.....99% of Toyota's are like this. The battery and gas tank are on the same side and the suspension...
Separate names with a comma.
