LOL I'm in the same boat: I have a 2JZGE and a MS (and now I'm at school with no place to work on it so it sits in moms garage...still) there...
oh yea, make sure you torque em RIGHT. I saw a guys wheel pass him on the track cause he didn't. F***ed the wheels (X4), F***ed the spacers (X4),...
'77 GS400. not quite as fast as you guys but fast enough. 25 hp is more than enough to pass at 65. [IMG] only mods are the alloy rims with disk...
Sure you can if you're short.
so they don't stick out past the spacer. The stock studs aren't very long tho. also check that there aren't holes in the wheels that will keep...
See crank. See crank walk. walk crank walk. You'll be a believer soon enough.
probably not the AFM (MAF) or injector pulse. I'm thinking more TPS. neither the AFM or injectors will make it run BETTER/harder. I'm thinking you...
few bolts hold it on, some carb cleaner to ungunk it, run the truck a while to work the bubbles out. nothing to really repair, either it works,...
+/- a little will be OK. I don't think I've ever seen under 25mm/1" bolt ons and I wouldn't use plate spacers that thick even w/ longer studs.
I'm not really sure about the problem you're describing, when you say it's "like power band surge like it goes wide open throttle after a few...
I don't even drive sober after about 2pm NYE and try to avoid the next day altogether. Even if I'm fine, the cops are still pulling people over...
yea, my 90 cressida out accelerates and out turns 4x4s. NICE snow tires, 5 speed, and old old LSD. till it's up to the bumper and acts like a plow...
the corner lights are their own circuit separate from the turn signals. just change the bulbs to LEDs.
Exactly.
Do you have a tach? it would be helpful. I'd put money on your idle being set too high and you're hitting fuel cut. Assuming 22RE: there's an...
If you want anything for it (like money) you should make mention of it. It would also be good to list your location.
as mentioned, it's totally dependant on the starting width and offset of the wheels. If the spacers bring the aftermarket centerline in line with...
If the idle valve is screwed all the way in check the throttle linkage. take the big hose off and make sure the throttle plate is closing...
22RE. W55. 2wd. 3.58 rear. no PS or AC. stock manifold and Y pipe to cherry bomb and 2.25 exhaust with several leaks and a possibly dead O2...
the 7MGE does use bigger injectors but the above guys are right. gasoline runs only in a very narrow AFR, adding more fuel or air will only hurt...
Separate names with a comma.
