The bane of the pickup truck, Hard to get traction. I didnt spin AT ALL when I went to the track on my wussy BFG 245's. But then again Im...
Foam fill the B pillars? Sounds like a good idea. What do you use? That home depot Great Stuff spray can stuff?
Ok, squeezed out a little more work today. My new parts didnt come in yet so I messed with the rear axle im building. Originally I was going...
NotAvailable & Hood- Its thin enough to be sprayed, (or able to be thinned to be sprayed). Says it right on the can. I brushed in on. goes on real...
Happy Easter. So got some more work done. I took out the pass. seatbelt, cleaned that section of floor and welded up all the extra bolt...
How about a 5 speed swap? A complete 22R/20R hybrid build and tech? for both tall & short deck blocks. -There are several online, but none...
Flame thrower coil. 15 degrees BTDC with no vaccum hoses connected. Good wires on Nippondenso plugs. .045 gap. Its simple, cheap and doesnt...
The gate was just under 150. 425 for everything. Packing orders not with me right now. Peel & Seal is at Lowes. $16 Bucks for a 6inx25ft...
:looney: I dont know whats wrong with me, but big brakes in big wheels are delish... My Lexxus LS400 hardware definatly has the stopping...
The floor panel was a PITA to weld in. I was using a Hobart gas mig, then switched to my lincoln home depot 110v gasless mig. Much better.( I...
Ok, being that my truck has been owned by my grandpa, dad and now me, figures it deserves some attention. I never did much body work before...
79-83 use a different suspension setup as 84-94 trucks :waytogo: Pre 79 I never bothered to learn, but they are different too. Just so you...
Well just one little tip... (this might be generation specific) One of the back head bolts doesnt like to come out with the still on the...
:D Who says you have to win on the top end? Yotas with Torque wins races... http://www.youtube.com/watch?v=eDr83V6_5js (im just...
I had a first gen Integra with a K20 out of a 'Lude in it, back in high school. Was givin to me because a guy left town and I used to work for...
:ROFL: Front wheel drive's for the women and children. But you lose your pair when your paying for college. :lol: O how I know.
Any like 84-94 2wd truck could have the fatter bar. Not just 79-83 trucks BTW.
Yea no problem. I had to use an air chisel to hammer out the old bushing. Then I used an oxy torch to cook out the remains.:evil: The...
Ok, you need to relax and remove torsion bar. Just undo the adjustment part and wiggle the bar back (its splined into a lever thats bolted to the...
Go to a yota dealer. $15 for both shifter seat and cup.
Separate names with a comma.
