Change the pressure switch as I stated before! Just use a set one ( less money ) & if a fix you can order another of what you use!:cool:
You say the control signal is shut off !! The control signal comes from a pressure switch ,no signal a bad pressure switch. All pressure switches...
Welcome , & you are in one of the best area of Cail. Have to drive my truck up there some day & around the Lake!!:cool:
If you think you will bag it @ some time in the future , go with dropped spindles ,as you will need later! I rode static dropped for 4 years:...
Make sure you plan out what you need /may need later! If you are going to or do later decided to bag, you'll want a 8'' min. notch, & weld on 8...
mirrors Price Comparison - up to 86% discount! - price-kicker.com I was thinking of using 92 Camaro power mirrors, first photo ,& this site has...
I had some while it was in primer but dumped them ,so just went out & shot these for you. Shows the functioning air flow, & I coated the under...
That looks pretty good! I went the other way,stripped ,filled & smoothed mine out!
Solved the air leak problem in my air system,leaking safety pop-off valve, got a new nickle plated one from McMaster-Carr,200 psi. System turns...
cowl hood, paste into the search box , photo's of my 88 Extra Cab with Danny's hood, same hood as standard cab!!:cool:
Here's a few more photo's & thanks again Dan. Your product is holding up great & is quite noticed @ shows!!
Thank you! Was a bit of work but the results were all worth the work!:cool:
I have a 12.9" rotor & 4 piston set up @ the front & a 11.32'' rotor & single 42 mm piston w/ e-brake @ the rear ,see my post or e-mail me for...
I went to a GM 3-wire,see my post on this subject! 100 amps @ idle /150 a speed! Also run a 1500amp hour Odyssey!:cool:
Well all my winter projects are done, the new hard lines in the bed ,back lit rocker switches for the power windows & safety locks, changed all...
Well I got all working ,reinstalled the inconstant bulbs @ the rear turn lights ( think the new flasher will work) as found two front leads...
You can use liquid graphics to get the the carbon fiber look! Check the internet to see if there is a shop in your area!:cool:
Adding resistors would be a real plain ,as from what I've read they go between the wires @ ea . bulb, & with Supra lights @ the rear that's a lot...
The polarity is correct, the problem I'm sure is the flasher relay,every thing I've read leads toward you have to use a LED ,no load...
I should add ,they not flashing fast,just not at all!! And I did the same ,just cut the wires & tied into them,soldered connections with shrink...
Separate names with a comma.
