toyed with wiring to try and hide it best i can.

 

Drove around with this hottie because we got bored and it was hot out. A/c for ladies (;
played music for some breakdancers, chilled til 7am
drove back from Carthage Missouri after an all nighter.
Took about ~3 hrs. Did avg 70-75mph with ac on except for passing.
I think I need to redo my valve lash soon too.

 

did nothing on the truck but ordered my tires for the 18's

 

Painted my Valve Cover and other parts for the engine.

 

where in iowa you from?

 

Slapped a new donut gasket onto the exhaust manifold, only to find out the EGR pipe is now leaking.

 

started fabbing a valance!

 

looked at it and reminised(sp?) on the good times we had together...

 

fixed

lol I feel the same at times

 

Waterloo area, U?

Today I stripped the rest of the frame down and just need to clean it up a bit and then I cleaned the head and valves.

 

im in southern iowa, osceola

 

today i stuck some kc lights on my 4x4 for the wheeling trip this saturday with bodybagged

maybe do a lincoln locker sometime this week

 

More trouble shooting AC problem on the 90... Tore out the blower/evap core to change expansion valve and Autozone gave me the wrong part...

Back on it tomorrow again after I change the tie rods on the wifey's car...

 

lol. hey now. its all in one piece from wat my eye can see... Its probly all discombobulated internally tho.. MWAHAHAH!

Anyway on with the topic....

today i tried talking my coworker into sellin me his yota, for parts tho... but i dint tell em that...

 

not what i did today.....

but spent the weekend replacing the timing chain only to put it all back together and have a huge oil leak! now i either need to take it all apart again mad or take it into the shop and just suck up the cost....

 

drove it hard

i love breaking stuff

 

Today I drove it to Toyota to pick up parts for my MR2

 

I put a new timing chain cover on and reset the cam timing

 

Took off the front steering stabilizer shock and cut off the frame bracket, saved about 5lbs and now is steers soooo much easier!

 

Today so far I fixed my positive camber issue when it's lifted all the way. An finished sanding my glove box area smooth an shaved part of the speaker area