what motor swaps can i do on my truck where the transmission will work with the motor? im looking for something with some more power to it..i like the 22r but its not enough for me...anything is help...thanks

 

22r is the best you are gonna get with an R series transmission. If you wanted to swap the bellhousing you could run an jz ( supra motor ) but that requires a decent amount of fabing and tech skill... and at that point you would want the supra transmission as well.

 

r motor r transmssions .. otherwise do an engineswap and keep the right trans with the new engine.

 

is that a accord in your pic? 90 to 93 accord.

 

What truck?

Year?

Trans code on build plate?

(edit) A 22r can be built to run pretty damn well....What are you planning to do?

 

Hi i havent been on for a while but if a 22r isnt doing it for you i would personaly go with a 2rz or 3rz many ppl have done this swap i know a few people here have done 7m and 2jz swaps into it but u can build a 2rz up pretty good also... and for the transmission i am lost if u have a r series transmission like a R151 or R154 thats the transmission that they put behind the v6 and I6... if ur truck is stock its probaly a w or g series transmission...

 

im just looking for a little more power...something that can keep up with everything else...and yea its a 92 accord

 

lol me and my 22re keeps up... so far.
I think the 2RZ is your most straight forward swap.


now if you want everything else to try to keep up with you, go with a JZ swap

 

yea the jz would be nice...very nice but they are hard to find around here...and once you do find them they are expensive...

 

2rz not so straight forward But fits under the hood quite well. If you're looking to do a swap you might as well do the tranny too. It's really the only way to get a more powerful motor in there.

Btw, nice accord. Looks pretty herra frush baller

 

haha thanks man...i just need to get the truck up and going...but its a long process...and alot of fabrication too...i still have to find a bed for it too...so im rolling 5 inch blocks in the back and not lowered in the front with no bed...so im always leaned back...but it likes to get side ways like that....when it rains =[

 

You can do a 1uz swap, with the kit i sell your stock W55 will bolt to the motor.


check my build thread.