im about to drop my 93. i've got the belltech spindles, and shocks. but what else will i need? i dont want to get in there and have to make a number of trips to the part store. right now im thinking new ball joints, and bump stops. just got in from looking at the truck and noticed that its been hitting the bump stops up there pretty good at stock height. so the new bump stops are a must. any info will be great. thanks.
mike.

 

i just did bell tech spindles and a bj flip in front needed nothing accept an allignment because the new spindles are one piece when your done one wheel straight and the other at a 45 degree angle,just put my 4'' blocks out back it sits nice on stock 14's,never messed with the front bump stops and i removed the rear ones ,and it ride great, ill post a pic soon

 

I did same as snacks except for the bj flip. No issues except for having to heat up the tie rods sleeves to bring the toe in.

 

How low are you going? Get a hold of Beefed Taco or check him out on Streetacos.com. GREAT STUFF for our trucks from a guy that knows and loves what he does!