A local guy is selling 5 of these rims, 2 with good tires, for cheap. Could someone photoshop these on this truck? Just remember, the steelies are 14's and the Moda's are 19's. I do plan on doing a 3/3 drop soon.

 

Sorry i dunno how photoshop, but my friend had 19s with a 3/3 drop before and his truck didnt look that dropped.. Looked almost stock height because the rims lifted the truck back up.

 

Do ett!!!!!

 

That might have to do with the tire height too....

18's with 45 series/245 width is close to what the stock 16" tire height was.

Now you'll be playing with a 19" wheel with probably a 35 series sidewall just to prevent it from lifting up....

Eh, I like the simplicity of the Moda's but wish it was in 18" form, just so we can have more room to play around

Skahide, I'll attempt to photoshop this soon.

 

the rims are wrapped in 245/35/19 Bridgestone Potenza RE750's

 

tires may be pricey for that weird size (19") also how cheap is cheap ? my vote is no unless they are priced 250 OR LESS.

 

here you go $450, but i might get down to $400 (had them online for a lil while) heck it is 5 rims and 2 good tires, i REALLY want 350z rims but none out here in East Texas
http://easttexas.craigslist.org/pts/1609982097.html

 

You have to say, $400 is a good price for such wheels. I actually am "FOR" this wheel lol.


Skahide, I'll get it photoshopped in a lil bit.

I say keep your steelies too, scuff/ sand them down and repaint them black. use them as your secondaries.


Lol and your brakes will look small

 

19's are going to be pretty big. I think you mentioned doing a 3/3 drop and with wheels that big, you would have a run some REALLY low profile tires to keep it low (30-35 series). Otherwise it might look stock with big wheels. 18's might be as big as you can go without considering cutting stuff for clearance too. Also those wheels are on a front wheel drive car and you will probably need 1" wheel spacers to get them to fit and clear your calipers. That's an easy $100-150 extra expense. Also keep in mind pushing the wheels out an extra inch may cause the wheels to hit the lip of the fenders and the bed if they won't hit already.
If 350z wheels are what you want, hold off and wait for some to show up. It might take a little longer but at least you'll be getting what you want and not settling for something. Also, the wheels on my truck needed the centers to be honed to fit the front and rear hubs. That was an extra 100 bucks. I ran 1/4 spacers for almost a year and they did fine but for safety I finally got around to getting them honed. These are the wheels I wanted from the get go, to get look I wanted. I waited for few months before scoring on them.
My brother bought some wheels off of a Lexus IS300 and ran them for a while and just recently found himself some wheels he's been wanting for a while now too, yup 350Z wheels. So they are out there if you keep looking. You might now him on here as Macawilial.

 

*Thanks CinNAMmon, great as always

*good point MacRib

THANKS FOR THE HELP AND INPUT GUYS.

 

Found some in Vegas!
a little pricey though...

[email protected]

 

what's the link?

 

sorry man having trouble with that. 2 sets on craigslist Las Vegas. 1st set were new take offs for $750 and the other set is going for $700.

 

dude i just found the 350z 18's 4 hours from me FOR $250!!!!!! Damn work schedule

 

contact, try to see if they would drive halfway

 

Might have them picked up tomorrow, but not to ne until this weekend (good ol sister). talk about luck.

 

Found a set for you.

Price and condition were pretty much how much mine were. Good luck with the search

http://inlandempire.craigslist.org/pts/1601142494.html

 

where is that??? lol

 

Don't wait... those things wont last at that price! Just make sure they're the 5 spoke and not the 6. As you can see by some of the other craigslist posts, $250 is a kick ass deal compared to the 2 listed in Las Vegas for $700+ or the one my brother suggested north of San Diego for $450. Where you at anyways? Are these close for you?