305 chevy to a toyota v-6 trans

Discussion in 'Engine/Drivetrain' started by LOW-YOTA, Oct 19, 2009.

  1. LOW-YOTA

    LOW-YOTA Newbie

    Joined:
    Aug 16, 2009
    Messages:
    12
    Likes Received:
    0
    Location:
    MANDEVILLE LA.
    Truck:
    1992 TOYOTA P-UP
    does anyone make a conversion kit to bolt a chevy 305 to a v-6 transmission. what is the toyota trans called
     
    LOW-YOTA, Oct 19, 2009
    #1
  3. ShoNuff

    ShoNuff Toyotaholic

    Joined:
    Oct 22, 2007
    Messages:
    1,559
    Likes Received:
    7
    Location:
    seattle
    Truck:
    75 hilux, 80 4x4
    i know there is a ton of aftermarket kits for a 350 but not sure about a 305.


    google "toyota truck 350" and be astounded at the results
     
    ShoNuff, Oct 19, 2009
    #2
  4. project_DragTruck_v2.0

    project_DragTruck_v2.0 Veteran

    Joined:
    Oct 4, 2009
    Messages:
    361
    Likes Received:
    1
    if it´l swap a 350, it will work for a 305 because the block is the same....the difference is in the bore and stroke. All GM blocks are the same from 283- 400 ci.
     
    project_DragTruck_v2.0, Oct 19, 2009
    #3
  5. thundering02

    thundering02 Addict

    Joined:
    Jun 22, 2009
    Messages:
    725
    Likes Received:
    0
    Location:
    Fenton 63026
    Slight differences based on the years but nothing to do with what hes looking for.
    some had fuel pump holes and the head bolts differed between the different displacements.
     
    thundering02, Oct 20, 2009
    #4
  6. project_DragTruck_v2.0

    project_DragTruck_v2.0 Veteran

    Joined:
    Oct 4, 2009
    Messages:
    361
    Likes Received:
    1
    Well, I meant as far as mount placement, and bell housing bolt locations. Trans dapt should make a plate for that I´d imagine.
     
    project_DragTruck_v2.0, Oct 21, 2009
    #5

Share This Page