if its a 22re...its under the intake manifold. You need a couple of wrenches and you need alot of PATIENCE....
on a 4wd its easy, only took me a few mins. i used:17mm wrench (for the front banjo bolt) 17mm std 1/2" drive socket (for rear banjo) 12mm std 3/8" drive socket with 3" ext for top mount bolt 12mm std 3/8" drive socket with a 3" and 9" (iirc) ext for bottom steps: turn the wheels left remove access panel on pass side inner fender remove fuel filter (bolted to engine block, just in front of and above starter) by removing front banjo bolt from the side and then the rear thru top of engine bay, then unbolting it. install filter using new crush washers