If your going to run the disc brake spacers then I go with 1/4 inch

What size pressure switch are you running on the compressor??

 

i think its 125 on 145 off i don't know it came with the truck

 

took the truck to the muffler shop today and decided to go a little old school and put a glasspack on it. sounds really good and than i had an exhaust leak at the motor and just fixed that i forgot 2 bolts oops but i am happy almost got all the air leaks fixed just have to look at all the valves fittings and than i should be good to go and than i can start driving it every know and than

 

well just took the widow for a ride with my wife and daughter and they both loved it and how i live in this small town everyone was looking i got to the town square and a bunch of high schoolers were hanging out and i dropped the rear and they were just staring it was great lol oh and this truck actually has some decent power!

 

truck is looking good...glad to hear that you got it back on the road! I like that tonneau cover...might have to look into getting one of those for my truck

 

yeah that tonneau cover is nice and it only takes like 10 min to put on and very easy to remove no drilling required

 

i just received my spacers the other day and put them on today and they look so much better they are an inch and a 1/4

 

lookin great man! glad you got her goin again!

 

wow, it coming out rly nice, is that a long bed by the way?

 

yes it is at first when i got it i didn't care for it but it has grown on me and love it

 

oh by the way i fixed the pressure switch i wired the relay wrong

 

powdercoat them rims red!!! lol

 

actually i am going to be doing that in a couple of weeks i called a guy and he said to prep prime and powder coat all 4 for 300 bucks is that a good deal?

 

If you dont know someone I would say thats an ok deal.

 

yea if u dnt kno a guy its alright, try to find it for a lil less n ull b good...

 

ill look around for a bit and maybe talk to a few buddies that might know someone see if i can get it a little cheaper even if i have to travel a little cause this guys is 2hours from me too. Oh im buying another air zenith compressor to run dual comps on my truck until i can get my edc done im getting a good deal on it too.

 

the other day i called a junk yard and found the manual steering shaft for my truck cause when i drilled the frame out and moved the gear box towards the firewall i noticed that the steering damper was rubbing pretty bad into the a-arm so i put the manual shaft on and it works great no more binding and everything and the shaft only cost 35 bucks with shipping so i am happy now and i will be getting my other comp this week sometime and installing it as well

 

so i finally got my spedo hooked up and the tach and all the lights on the air ride gauges only thing now i notice since i put the spacers on the front of the truck it shakes when i go over 25 mph i don't know if its from the tires or what but here are some pics of the truck doing side to side

 

Spacers where. . . the rims?

 

yeah i have 1 and 1/4 spacers