I want to bag my 94 single cab 2wd Toyota pickup. Can I get some suggestions on full kits to buy kinda cheap?

Thanks

 

Do some research as to what people have used on same truck as yours, so you know ahead what works & what problems have came up!
Avoid kits has you will change things along the way. Decide what air management or controller you want to use , what bags & placement of you want to use, what type of link set up ( FORWARD MOUNTED IS WHAT I RECOMMEND) .
And make a list of parts & who to buy from, & start collecting all that will be used.
DO IT ONCE AND DO IT CORRECTLY !

 

Many ways to achieve your goal. Do your research, Pay once, Cry once.

 

Did you run into the problem of your driveline being too long because I think I am. I only have a 1/16th inch of the yoke showing in the back of my transmission.

 

No, only problem with my 2 piece drive shaft was had to have a double careen bearing installed at the front of the rear shaft & a slip joint at the rear . This was to correct the pinion angle that was causing a noise!