I spent a few weeks looking up how to install the 94 integra seats into my 93 extra cab (that had the sr5 buckets that were taken out to put in my 1989 toyota sunrader motorhome becuase they are awesome for long distances). I found a few hints on how to do it. I will post pictures in a bit. The passenger side was easy. The front two line up perfectly, the inner left line up over the hole, so I used a stack of washers and a longer grade 8 bolt to cinch it down. The outer back portion is curved at a 45 angle so a simple bracket was made out of 1/8 steel, bent and drilled two holes, one for the floor and one for the seat mount. Bolted right up. The drivers side was a bit more difficult. The front two match up but the rear was off about .5" So I drilled out about .5 in the front mounts and elarged the rear inside as well. I was then able to use the stack of washers and the bracket and fits great. Nice seats and easier then I thought.

 

Pics man, pics?!

 

The truck is a little bit dirty but its my daily. I got these for $100 on clist. I plan on painting the washers and brackets black.

 

Looks good! I need a center console like that.

 

good on job on the seats!!

 

ditto, mine is usless....lol


Nice job man!

 

Sweet!! Red Xcab too?! High Five! i thought about honda seats (civic, accord, or even Teggy) and celica seats too.

 

yep its a 93 extra cab with 130k miles. I bought it from the original owner for 3.5k with recent timing belt done. I love this thing. I also only paid 100 for the seats which was a steal i think for thier condition.

 

Be happy you have one!
Bench seats suck.