The rear bag and C-notch set up.

 

loooks great!! i really dig those wheels!! and that green is slick too. nice truck man

 

Thank you! I still have a few things I want to finish before I say she's done

 

Did some cleaning and updated the Dash and I scored a killer deal on a front Bumper. I pick up the bumper and grill next week.

 

Cleaned the front up, inspection of the whole front end bolts gone through. I also changed the seals and repacked the bearings.

 

All back together with new studs, I had to add a 5/16 spacer to keep the upper ball joints from rubbing while driving with the rear lowered.

 

Old dash out...! I Swear someone went to Mexico to have this dash wrapped!

 

4runner Dash in! I still need to replace the pad, but it wasn't a bad deal for $120 and the dash only has 144,000 miles. I got everything including the center console. He is also holding the front bumper, grill headlights for me. I still plan on changing out the steering wheel and I want to replace the cover as well.

 

Now I just need to buy the oil pressure sender and figure out the tach. My 94 has been hacked so wiring is no fun! About to rip it all out and start over with a donor harness.

 

Last picture...! I Forgot how easy these trucks can be work on!

 

any before photos of the dash? was the stock dash setup for a single din only radio? I need brackets for a single din dash.

 

The original dash didn't have the brackets. They used wood screws and plumbers tape to mount the radio.

 

Update..! Race Truck prep for my next race. I thought I'd change out my 200,000+ bushings with new ones. My next race is at the end of August. And it is a night race which is my favorite! I'm Also replacing Brake Pads and wheel bearings and seals thanks to my sponsor Brockton Auto Clinic out of Riverside Ca and his suppliers World Pac..!

 

One bushing set done on to the next...! The Torch is a must..! I just heated the metal inside until it slide out. The hardest part was ripping what was left of the bushing.

 

How much do those IVD shocks run retail?

 

I'm not sure because they sponsor the class. But if your building one to race this series I know that they only charge $1100. They also provide track side service for us at the races for no charge.

 

Your truck is obviously a great Yogi that, through much meditation has learned the art of levitating.
Namaste, Hi-Lux... Namaste!

Seriously, good looking trucks.

 

Thank you! I appreciate that!

 

Almost done! Just waiting for my ARP wheel studs to show up so I can finish off the new bushings, Bearings, and Rotors and Pads.

 

Here are the Studs I'm using, I needed the strongest I could get because I might be playing with some wide offset wheels to see how much better they corner.