I'm looking at some wheels off a 2010-2012
Mustang 19x8.5.
Will they work or what issues will I have.
My truck is a 92 2wd dlx reg cab.
Thanks
Macon

 

Make sure the center bore is large enough or they wont bolt on proper. And depending on the offset theyre guna rub on the triangulating rod that goes from the LCA to the frame

 

Should I be looking at a narrower rim.
I'm running a 2-3 drop not planning on going any lower.

 

Well mine was stock height with the same spec wheels youre looking at with a +42 or +45 offset and it rubbed at full lock. A few times on the rear right above the frame. And i bottomed out a couple times on the front inner fender.

Could have been my tire size 245/35 i think. Just have a big hammer ready just in case lol

 

Thanks