hey team I just installed my shifter and noticed its sticking to the right. it doesnt bounce back to neutral.Was I supposed to put some grease somewhere in there? I tried calling tech support but their offices are closed on Sunday. Help please. oh and all gears go in fine.

 

U got the one for the RHD models......





























Lol jk.

 

lol i had to think about that for a sec. I'm guessing it'll "settle" in? Not sure if i want to start assembling the carpet and seats again until i know for sure. Ugh. It's so HOOOOOOT. Milk was a bad choice.

 

If its not coming back to center it may just be missing some small springs.

 

UPDATE: Shifter is working fine now. I guess it just had to break in. There is a little more transmission noise than normal, but can only be heard with the stereo off and windows rolled up. The throws between 3,4,5, and reverse are really noticeable and the overall feel exudes precision. It's a joy to row the gears .

 

On mine I had to modify the ball ( a faction too large), & the noise ,yes, you will have to live with.
I tried a rubber sleeve over the lower portion of the shaft,helped a little!

 

i loved my lce shifter when i drove my truck......... that, mated with the 9lb. flywheel made it tremendous fun you would not believe

as for the noise, i remember reading somewhere a slight solution although i never cared or heard much of it to try it..... if you can find a way to attach or clamp a well made lead or very solid dense steel to the base around the neck, it will absorb some of the resonating vibration going through the shifter. this lead weight can go under the shifter boot and be covered. just an idea.....

 

crud, i made the mistake of replacing the bushing with a martin crawler one and now i cant get the retaining ring back on. It looks like this: any tips? This thing is an absolute pain to get back on.

 

Why did u have to modify the ball? I just installed mine and having a hard time getting it into 2nd gear any ideas?