MY PHOTOBUCKET WENT OUT SO I HAD TO START A NEW ONE SORRY GUYS HERES SOME PICS....





















MORE UPDATES COMING SOON

 

looking really good!

how much room is needed for the tires to clear the bed lip? you can narrow these rearends 1.5" without getting new axles. just need to narrow housing and cut the excess spline off the axle.

with my 20x8.5 +28 and 225/30/20 and my axle narrowed 1.5" my tires cleared by like 1/32" on each side. if you have a narrower wheel/higher offset you should clear after narrowing.

 

I gotta measure again but its tight i have room to make it work, i might take that route though thanks for the info.
your trucks looking good too. i like the way you went with the bed floor.

 

Truck looks really good! I love the rims!

 

nice work. like the setup u did with the back half

 

lovin' it! that last pic just does it for me...very inspirational!

 

THANKS GUYS IVE BEEN A LITTLE BUSY I HAD TO DO A SIDE JOB, SO I HAVENT HAD TIME TO WORK ON THE TRUCK.
BUT THIS PAST SUNDAY I MADE A LITTLE PROGRESS...
AT THE MOMENT I HAVE A 22RE SITTING IN THE TRUCK, BUT I BOUGHT A DONOR VEHICLE A COUPLE MONTHS BACK AND I'VE DECIDED THAT I'M CHANGING THE ENGINE OUT FOR A BIT MORE POWER.

FRONT FRAME HORNS TACKED IN AND LOWER BAG MOUNTS DONE I HAVE TO DO SOMETHING WITH THE LOWER BALL JOINTS FOR THE SUPRA SPINDLES BEFORE I MOVE ON AND BAG THE FRONT OF THIS THING.

 

tires look huge in there lol

looking good!

 

Finally some more progress.....started to set up the bags in the front end
not the finished product just the beginning




MORE PROGRESS SOON..SLOWLY BUT SURELY

 

Oh forgot to mention those are re 7's in the front

 

ONE BIG STEP FORWARD....
SOME LAYED OUT PICS









AND WE HAVE FULL LIFT








MY AIR PRESSURE BETWEEN BOTH FRONT BAGS A FULL LIFT


I HAVE FULL TURNING RADIUS ON 20S




MY AIR PRESSURE OF WHAT SHOULD BE MY GENERAL RIDE HEIGHT


MY GIRL LENDING A HAND GRINDING SOME GUSSETS


WELDED IN SOME REAR SHOCKS OFF A 95 HARDBODY WORKED PERFECT

 

Those are TSW Thruxtons, I used to have a set of 19s on my MK4 GTi, a lot different offset though.

 

Looking good!

 

Wow, great build!

 

NO MANY UPDATES ON THE BUILD I'VE HAD ALOT GOING ON AND I DONT WANNA RUSH IT BUT I DID MANAGE TO GET IT TOGETHER ENOUGH TO TOW IT TO GROUNDED FOR LIFE THIS YEAR HERE IS A FEW PICS