Well after some tuning today I got her going good tad on the lean at 13.8/13.9 at full throttle and ideling at 14.8


still needs more fuel so I can add my air instead of taking it away


but I did pick up a set of 89 plus 7mge injectors from the pick and pull not sure when i will install them thou




all post pics and video soon and dyno video too

 

Nash, Do you need upgraded injectors due to running a Supra over sized AFM and the cam setup? Did you install a different throttle body?

The numbers listed above, How were they acquired? What tool/programer was used?

I've been reading your thread but your loosing me on the tuning stuff. Would I benefit from running upgraded injectors for my new build instead of sending mine off for a rebuild. If so, Why?

HINT..! When explaining, please be clear as possible. If you don't like typing, I can send you my number.

Thanks Bud. By the way your Trucks coming along nice.

 

Before the truck was fine at nice 12 to low 13 were ya wana be for power and I weened the afm for air with the bleed screw since it did not matter much since stock cam well don't flow well at all.

As for needing the 7mge injectors ya don't need them...... you can just over drive the stock injectors by putting in an adjustable fuel regulator, but for me I bought a stand alone ecu so i can fully control every thing.

and the other part about 7mge injectors is there muilty nozzle in stead of the single pintel 22re injector so it's spray pattern is much much better

the 7mgte throttle body is nice upgrade for being how cheep and easy it is to find since 7mgte get rod knock or blow a head gasket

but to answer your qestion send them off is not a bad idea and in the long run if you hit the zone were you need more fuel ya can all ways sell thous


all my tuning is done with adjust afm spring tension and the bleed screw for the unmeter air in the afm and throttle body ideal control and oh ya timing

if ya have any more qestion just ask away

 

Got it. Thanks

 

race day woot woot truck is dialed in and tuned mixed with the new alignment and add power this should be a fun day

 

**** I miss my truck grrr....Have to drive around this honda pile of **** eco button hippy mobile


e brake works thou hehehe

 

that sucks!!! I hope you get your truck back soon!!!

 

pic's


getting ready


new cam look at the base circal were they grind the cam

stock cam

**** on the ground


auto cross

 

well i got my truck back from the body shop looks good now nice new paint is all ways nice


and today i just installed my afpr and some what fixed my lean issue after some tuning goes like stink now

it's the fuel reg that i converted from carb to efi some time ago


I should make a wot pull and record it ya be surprised on how fast it gets up in speed


here some pic's

 

well I ordered brakes for the truck

350 z track rotors and 300zx calipers less see if i can make this work hummm

 

anything new yet???

 

Shouldn't be too difficult. My roommate did that exact setup on his 2RZ powered Datsun 720. It has Datsun Spindles, but Toyota hubs. He stared out with 89-95 hubs, but then switced to the 79-83 hubs because they have threads in the hub instead of the disc. That way he could just bolt the track edition rotor to the backside of the hub instead of running bolts thru the front side with nuts on the back.


<img src="http://i539.photobucket.com/albums/ff351/twinturbotaco/front-suspension-2.jpg" border="0" alt=" photo front-suspension-2.jpg"/>

<img src="http://i539.photobucket.com/albums/ff351/twinturbotaco/front-suspension-1.jpg" border="0" alt=" photo front-suspension-1.jpg"/>

Sorry for the crappy pictures, cellphones had terrible resolution when these pics were taken 7 years ago, hahaha

 

Update?

 

Busy with school right now sadly but I think I can stop studying for sundays all day racing event i hope it will be dry cause my lsd does not like the wet very much kind has a mind of it's own

ps I need to swap in the stand alone too my gas milage s like 230 km to a tank

 

Do you have any videos of your autocross? If not you should get some next time. I am seriously thinking about building another truck for autocross. We have a lot of races around here and there is no trucks at all.

 

i have no go pro but maybe I should buy one

for this event

 

Oh have a friend record a quick video on their phone. I would prefer a video from the side lines than attached to the car, really shows the skills. haha

 

well i think this event will be filmed so we will see

 

dear lord that was a fun day

but truck still needs some work it plows abit but it some what neutral so it needs abit more over steer

I shorten my rear ends links and this helped some but but did not fx the issue look like leafs got to go and a 3 link should be swapped in

 

Well I have some pic's of the event

one other thing to add is bloody hateing on how much I have to turn my wheel as well

to much hand over hand

I beat the v8 s10 again too heheh