6 inch blocks? Danggg...http://www.google.com/url?sa=t&rct=...GSt_4fAojDbO0WKiMIxxxSw&bvm=bv.49967636,d.cGE he might help you...
I offer 5", and have made 6", but the 6" were for a lifted truck and I made them longer than my already long 6-1/2" blocks. Why don't you just do a leaf mod and run a smaller block. It'll be a better way to go lower... btw, you should get u-bolts that are 9/16" diameter instead of 1/2", they're going to be very long so the fatter ones will be safer. Beware of low end junk when getting ones this long. PICS 1) 3" street kit & 6" monsters for 6 lug 2) grade eight 9/16" u-bolts 3) 5" block & ubolt street
Hey, can I run the 5 inch blocks on my 88 with no other mods? Or do I have to modify anything..I'm planning on ordering a set.
compaired to bags, yes lol. s.s.k. - you can run 5 inch drop blocks. but either way when going 5 inches or lower, its advisable to c notch the frame and crossmembers or you will sit on them and not get the full drop / suspension travel you would need..
I can't hate. I tried to stack a lot of 1" blocks way back in the day. Didn't have locating dowels either and they slid out it was terrible lol
