I recently got 3/4 inch spacers for the rear of my truck but the studs only stick out about a 1/4 inch.. I've looked around for longer studs and the Lexus is300's studs seem like they'd work because they have the same knurl size and thread size, but I'm still not sure and I don't want to order anything that is the wrong fit. Anyone know if they'll work? Here is the link to the studs http://www.summitracing.com/parts/arp-100-7715
This may help I bet if you call arp they'll have a listing for these trucks . But I also found this as to some relation to the is300 studs http://www.off-roadweb.com/tech/1007or_arp_wheel_studs_toyota_4runner/
almost all toyota cars use the same studs. Or at least the same replacement studs per dorman. The ones listed for the 4wd rear are the listed (by dorman, whos book I was looking through for reference) longer stud for 2wd applications. Albeit only about 1/4" longer. If A=B and B=C then A=C aftermarket extended studs for most toyota cars should fit. Don't quote me I haven't tried it.
they "work" or are they the same size and are interchangeable according to the book? I wouldn't be surprised if they were but want to make sure.
