Anyone have pics / measurments of exactly where they cut the frame fron and back for the Z ? I'm getting ready to make the cuts today and wanted a reference. Any help would be great. Thanks.
Got a few good pics from Michael's build thread. Going to do a good writeup for future Z'ers out there as I go along .
I thought most Z's were just beyond the measurements of where the cab sat. Many look like about 3-4 inches beyond to give room to build up and smooth out the z with some extra plating.
On these trucks, the brake line bracket is welded to the frame, (the one that holds the rubber line). Right near that on top of the frame is a small hole on both sides. About a 1/4" behind that hole is where I cut, and its perfect. That's after pouring through hundreds of online pics to see. Myself and Jason uc93 are gonna be the next Seth's on baggin an body ing and z'ng lol
