i want to take every thing i can take off and still run its a stock floored 85 no heat ac webber card getting header any help will be great i want it to look like it dosent run
Weber carb, rusty header, no vacuum advance hooked up, manual breaks, ghetto throttle linkage and that should do it. Everything else throw away and block off. Advance your timing to 12 to get better power from the missing advance.
Block off and remove air injection and egr. And remove all vac lines and add caps. Do this running so u know which ones it needs to run instead of ripping everything out then finding out it doesnt start. Weber alone with header no egr no air injections gonna look clean. Keep vac advance. They sell a steel braided vac line that's pretty sweet. And yea manuel brakes (which sucks) Research what everything does. Understand how it works together. Amd then it will be very apperent as to what u can delete. As long as u keep fuel spark and combustion and in good time. With an alternator obv. And that's all ya need!
so you want to also do a wire tuck if this is what your after. most of the harness you wont need anyway as the plugs would have gone into most of the emissions stuff your removing. id also recommend getting the plug kit from LCE for your intake manifold so you wont have unconnected sensors sitting there. looks much cleaner.
Lol Hammer the pipe flat and fold it over.You can weld the end but most of the time folding it and pounding it flat seals them good.You can also cut a can and use it like a block off where it mounts to the block for extra credit.
