So I did some searching but everything I find is based of a 4wd.... are 4wd - 2wd lug studs the same??? What I've come up with so far is Lexus is300 studs are the ones to use?? I searched eBay found several sets with measurements listed... only issue is I haven't removed a stock stud to see the knurl dia. Anyone have experience with this??? Thanks in advance
Not sure about specifics of Toyota wheel studs but you can buy replacement studs of many deferent lengths and sizes at the parts house my boy just bought longer lugs from advance auto and put them in his eg hatch they have an inch inch and a half lug sticking out past the nut after wheels are tight.
Yeah I got some for my Nissan before easy no problem.... My problem here is there's no Toyota pick up applications so u need to cross reference a diff car... Same knurl and same thread pitch .... guess I'll figure it out and report back to help someone like me in the future
arp#100-7715 i was given this part number for arp studs by a friend. they are the same size just stronger and a little longer then stock.
Yup that part number threw a Google and eBay search pulls up the is300 lugs... so looks like that's what ima try thanks buddy ARP WHEEL STUDS LEXUS IS300 100-7715 items in GoPerformance store on eBay!
ARP EXTENDED LENGTH WHEEL*STUDS M12 X 1.5 RH (HONDA STOCK REPLACEMENTS 1997-LATER)*5 PACK MSRP: $28.39* YOUR COST: $19.99 PLUS $4.95 SHIPPING PN: 100-7712 Knurl Diameter 0.485 in. Knurl Length (in) 0.275 in. Notes Fits most 1980-2000 Honda. Quantity Sold as a set of 5. Quick Start Nose Yes Thread Size 12mm x 1.50 RH Underhead Length (in)
dorman catalogs, if you dig deep enough (What most parts stores carry) say the 4wd rear stud is a longer alternative for the 2wd. unfortunately they're less than 1/2" longer (8-10mm IIRC). Yes, the 2wd and 4wd knurl and threads are the same. 2wds use the same part number (from dorman) as 90% of toyota cars so extended studs for cressidas, supras, mr2s, camrys, corollas, etc will all work.
