To get the bumper lights to work as parking lights/signal lights.... crappy part is the eBay LEd lights I bought, the low side wasn't bright enough to my liking... so I wired them backwards so now you can't see em blink anyways... but it works good for what I wanted its still brighter then a single filament bulb and won't melt my cheapo e bay lights

 

nice looks good. Whats the backspace on the wheels. Like the lip on the wheels.

 

+22 offset

 

Post pictures of it layed out

 

Fully aired out.... I need to do some lower arms and spindals get it to lay out FLAT

 

Whats the wheel specs overall. diameter, width,? 18x8?

 

Lol one typo I did make... I must of been hi when I did my math I paid 120 a wheel... was 480 for the set oops... but yeah they are as posted thanks Aguilar

 

One doesn't have time to read many pages when all you have to do is ask....

 

i've laid 225/35/18's on stock arms and spindles. to get the truck to lay flat you'll need to raise/modify the trans crossmember, and z the frame up front.

 

Well its not sitting on any part of the cross member nor front half of the frame... looks like I have at least 2-3 more inches of slam before any of what you mentioned needs to take place.... all of what would be nice but I'm actually happy how it is I'm more less installing the djm arms and maybe spindals if needed only to gain more suspension travel while rolling at a low ride height

 

Also I have not checked to see I think my front shocks bump before the bags do... so it may not be all the way down so to speak

 

My goal is to ride perfect and comfy at this height.... I'm very close like I said I just need a lil more travel up front




Rear is good as is

 

truck looks good bro!

 

Nice truck! Looks like you need to Z the frame though.

 

Your right bro... it would be the way to go... and the crossmeber is hitting I was wrong... as always


But if I did what u said I could run stock everything and achive what I want.... but there's so much on the list I need new bags my valves look old I want to do sooo much... all in time

 

Chillen in Garden Grove under the cali palms installing my HID kit

 

looks like alot of negative camber not even aired out. Ill bet the front bag setup wasent made to lay out fully.Probably maxing out balljoints.

 

all good man. just didn't want ya to spend all the money on those things expecting it lay flat and then it didn't.

 

What about a low profile tranny x-member? I bought one for my truck thru lowriderdepot.com