so the mailman recently dropped off headlights but i was wondering how do i wire those black and red wires?
Looks like yours have a smaller light there on the bottom kind of like mine.I used those lights for the parking light.Just cut and spliced the wire direct on both sides.I also used the outer row of lights on mine for blinkers.Looks good
You have new ones?First you need those clips that go on the radiator support behind the housing and those two long philips screws I think one top one inner side and the spring on the opposite side.Put the housing in the two screws and pull that spring with a long nose and lock it to the radiator support.It's easy brotha.Then just adjust those screws to make the light point to where you like.heres a pic you can kinda see it
haha thanks for the input, but i was looking for on how to seps on how to get to the headlights? such as do i remove the griill? corners? bumper? etc?
Just get u a small drill bit and drill off the head on the screw so u can remove the square retainer that holds the lights in place then finagle what's left of the screw out its pretty common the screws aren't treated and get rusted and stuck sometimes and u normally don't have to remove the grill but if your dealing with rusted screws u might get better room to work without it on