You should only need 3 one on the block one on the intake and one on the exhaust. I ordered mine from lce but lots of guys make their own.
It's actually two on the exhaust isn't it? one per bolt or something? Any links to the one for the intake?
depends on your exhaust setup.Mine are headman headers and only one blockoff if stock one on eachside of the manifoldcoulda made a nicer one for the headers that was just fast break.For the one on the intake I bent and folded the water neck that comes down underneath. There is also the on on the left side near the water pump same thing folded that and welded the end.Found it
Does your manifold look like the one in his picture? If so you need two block offs for the exhaust. My truck only needed one for the exhaust, lce calls that one a O2 block off plate. You will need the first kit for sure but you will only need either the oxygen sensor block off or the air injection block off depending on your header style. EGR Block Plate Kit - 20R/22R(Carb. Only) Oxygen Sensor Block Plate Kit - 2-Bolt Style Air Injection Block Plate Kit - 22R/RE
What the boys do over here is cut up a beer(preferably BUDLIGHT)can and put it behind the plate with the wholes in it.Works cherry too.
