only thing I would change is the engine bay, give that baby a deep cleaning wash and wax and it will be super!!

 

^ This for sure. My bay is nothing to be proud of . I've been considering a re-build with a bit more power . Got to get it in paint first and "Z ". ! step @ a time

 

Man what lights are those in your corners? WOW they are bright!

 

Just some led bulbs I got on ebay.

 

fresh... we have the same front end haha, only i have a 91 dlx cab. ever considered chrome door mirrors? like the ones that angle down on motorcycles? that would look clean, althought the shaved look is also nice. well done.

 

Thanks. I'm not going to run mirrors. And not a big fan of chrome.

 

lol look at the brunette bombshell build. i think the side mirrors from that would look bitchin on your. just my 2 scents. lol

PS, how'd you get just the corner lights to come on?

 

Ive seen that build, still not intrested in mirrors. And the corners come on with the parking lights...??? Maybe yours arent wired properly?

 

yeah, the more i look at your ride the more i like it. you say you are gonna paint it red? wouldnt surprise me if mine arent wired right. i have a few electrical gremlins i need to track down but havent had time to tear in behind the engine or too far up into the dash. know anywhere to get headlight aiming assemblys? mine dont work anymore and point straight down currently.

 

Link or part number / bulb number

 

Superbrightleds.com will have what you need

 

Damn, that was a lot of reading....but well worth it

 

I concure with his notion! Super sweet build so far though man!

 

Thanks guys.

 

So fully laid out, to lay rocker, how much a of a BD would you need? To get past the pinch..

 

bump

 

Just measured mine... Looks to be 3 1/4' maybe a smidge less

 

Exactly what I was lookin for . 1 inch Z and a 2.25 inch body drop lays rocker past the pinch. Where u measure from?

 

Negative. 1.25-1.50 z and 3' or so to the rocker BD. My truck laid out, the rocker is still 3 in or so off the ground.

 

Wtf then. While mine was on the cross beams I had 2.25 to the rocker. Past te pinch. So I set it up 3/4 and bodied past it then rolled the pinch after. Crazy the difference.