If I'm gonna change my truck to a 92-95 4runner front end. Will I have to change the fenders too?

 

If you want the full 4Runner look, you'll need 92-95 4Runner turn signals to match the grille. That will require 4WD fenders from any 89-95 4WD truck/ 90-95 4Runner.

you can run 2wd fenders, but you'll need to mod the 2wd corners to adapt.

 

What do you mean by modding? I am just asking because I have the 4runner bumper and and the 2wd fenders with the corner and I didn't mod anything.

 

Will I have to mod the core support?

 

Are you using the 92-95 headlights and grille? i think there's minor drilling unless you want to swap over the whole radiator support.


92-95 4runner grilles and corners use clips instead of prongs like the rest of us do.

 

I purchased my 90 with the 4runner conversion and the radiator support. I am not fond of the way headlights are mounted and have a 4runner rad support I am going to swap in to make it all correct. lots of spot welds to drill but will be worth it in the end.

 

Would it look right at all to run 2wd fenders with a 4runner front end? Or should I just get 4wd fenders?

 

4runner front end with 2wd fenders, stock core support.
on my old red toy



on my current silver toy
http://www.toyotaminis.com/forum/build-up-project-threads-25/my-silver-toy-9713/index2.html

 

Complete 93 4 runner front end (core support as well) 4wd fenders look way better in my opinion.

 

It's totally doable. hey 2wd fender guys, how'd you mount the 2wd corners to the 92-95 4runner grille?

 

I used 3m automotive double face tape, and the 2 factory screws. never had a problem.

 

This is mine, old picture... haven't taken one in a while of the front.

 

I'm thinking about doing 4runner conversion. So if I get the core 4runner radiator support it should just bolt on right? And the 2wd corners do I have to drill new holes to the 4runner grill.

 

this is how i want mine done. Nice job!

 

No it doesent just bolt on. Pinch welds all around. Look in my build thread for pics.