What clip did you put on the front.

 

92 - 95 4runner again, but this time I am using genuine toyota fenders and a 4runner core support.. I also did a battery intake swap and some wire tucking.

heres about what she looks like right now, before home depot moved into my garage. I have done a couple minor things since like fully bolted in the core support and removed the left over ac parts and horns still bolted to the clip

 

Wheres your old front end?

 

Where did you get that alternator from?

 

I dont know where he got his from But I got my 170 amp Load Boss alternator off ebay for $170 2 years ago and would recommend it to anyone!

 

I wouldnt grab a e bay one. Most are re manufactured and are just rewound in the original casing, which does nothing to improve how many amps it puts out.

 

Don't jack his thread

 

Cant even edit. Sorry man.

 

a lot of its on the side of the 55 freeway



here is the accident thread

summit

 

ok , so the house is done and I got my garage cleaned back out and ready for work.




I also picked up a new daily driver. Here's a pic from the day I got it, roughly 5 minutes before I started taking things apart..

 

Wow now daily you got there. Also its nice to see you back on here. Truck is looking good man

 

good to hear you kept the truck...... nice daily you picked up. so whats the plan?

 

well the daily needs a a couple more things before I am really happy with it.

So far I have done tint (including the entire windshield), touch screen, alarm, HID's, all weather floor mats, a set of new tacoma wheels, new brakes, plugs, and a fuel filter

sitting on top of my toolbox is some bilstein 5100's, some urethane bushings and some mobil 1 synthetic

I still need some amps, speakers and a spray in bedliner then I will be content..... ok maybe intake and exhaust too

My minis going to be basically the same as before it got wrecked except a lot cleaner with the intake / battery swap/ wire tuck . I need some bigger injectors and hopefully I can squeeze a ported out and polished intake manifold in the budget so I can check off "under the hood" as finished.

 

Nice man sounds good cant wait to see the finished product

 

back from the dead

ok its been a while, lifes expensive with 2 trucks. I worked on the mini for the first time in a while today, here is a current pic
​

​

I hope to POR-15 her by the end of the week. I did do some stuff to the daily though.

First I tore the interior out and sound dampened the sh!t out of everything





and while I had it apart I couldn't live with myself putting a stock headliner back in.



so that got wrapped in suede



Then I started the stereo off with some CDT Euro sport 3 way components. The woofer is mounted to a precision machined plate we make in house at my shop.



then I had a guy with a tacoma like mine come in for some stereo work so I built him these



and these




I had to give them to the customer though, damn customers.

I also got some LED tails for the Taco and smoked them





that's all for now folks!

 

If you would not mind, do you think you could do a product list and where you got them from. Thank you.

 

My 500th post

I figure I better make it a good one, or at least include a picture




I got my front end all por 15'd and seam sealed, time to reassemble


My name is Joe and I am a truck-o-holic

 

Dang thats clean looking bro. Nice job

 

Just so everyone knows the Addco Stock number for the front is 736 and 382 for the rear. You can go to the addco site to see the complete line and list of distributors. I found them on suspensionconnect.com for $169.16 for the front and $129.56 for the rear.

 

Man, I almost made that switch on my 22re and didn't because of that. I might do it later when I do my swap if it fits. I'm planning a 1UZFE swap in my truck.