Misc. Stout Parts Wanted

Discussion in 'Wanted' started by Craigar29, Jan 26, 2012.

  1. Craigar29

    Craigar29 Newbie

    Joined:
    Jan 14, 2012
    Messages:
    2
    Likes Received:
    0
    Location:
    Washington
    Truck:
    1967 Stout
    Hello all. Im looking for some interior parts for a 67' Stout such as steering wheel, gas pedal, pedal covers, white (w.p.l.) dash buttons, dome light cover and the hose that runs from carb to air cleaner. Let me know price and condition. Thank you :waytogo:
     
  2. goingnowherefast

    goingnowherefast Enthusiast

    Joined:
    Feb 1, 2010
    Messages:
    156
    Likes Received:
    1
    Location:
    Haddam CT
    Truck:
    1965 Stout
    had some luck in the past over here for my 65 stout. sites not too active but u may get lucky. Good Luck! any pics?

    TORC Forums - STOUTS
     
  3. whysmee

    whysmee Enthusiast

    Joined:
    Dec 18, 2011
    Messages:
    257
    Likes Received:
    2
    Truck:
    62 toyopet and 76 toyota stout
    the headlight switch burns out on most of them due to brighter lights being fitted, they should of used a relay. i looked around in an attempt to keep my 1962 RK45 "toyopet" as original as possible and ended up opting to fit switches out of the 70's RK 101. the steering wheel is the same as a land cruiser and possibly hilux as i think they are a standard item in all toyota, for fitting a sports steering wheel. the rubber foot treads on the clutch and brake pedals are a standard size and good luck with the air intake, i just super glued the cracks up on mine as most i have seen either have a universal air intake pipe used for turbos or just have and air filter on top of the carby

    http://i1089.photobucket.com/albums/i348/whysmee2/yep1.jpg

    http://i1089.photobucket.com/albums/i348/whysmee2/toeday3.jpg

    http://i1089.photobucket.com/albums/i348/whysmee2/P26-01-12_2010.jpg

    http://i1089.photobucket.com/albums/i348/whysmee2/P10-09-11_181901.jpg

    i opted for a 5R engine over the original 1500cc R motor
     
    Last edited: Jan 28, 2012
  4. Craigar29

    Craigar29 Newbie

    Joined:
    Jan 14, 2012
    Messages:
    2
    Likes Received:
    0
    Location:
    Washington
    Truck:
    1967 Stout
    Thanks for wishing me good luck goingnowherefast and the info whysmee, much appreciated. I'm starting to realize finding parts is a challenge but that is one of the perks with a project :waytogo: I did happen to find some pedal covers for the 78' and down Land Cruiser's on Ebay that ended up fitting perfectly. Ill probably be using the universal air intake piping and the added chrome will look sweet. As for the white w.p.l dash buttons, dome light cover and gas pedal, still looking for those :)
     

Share This Page