Got some 98 cobra wheels their 17x9 and 17x10 (or 10.5). Dont know the offset just pick them up cause they looked nice lol. Has anyone ever ran these? I think i might have to bore them out, bit other then that will they be to wide or am i good?
I have 96 Svt Cobra wheel on my 92. They are 17x8 and Im running 225/45/R17 @ all 4 corners with no problems. Did not have to modify anything to make them fit.
weird...was something change for the 94 trucks...cause everything says I have a hub bore of 60.1mm...But I just measured it and it's 67mm. Which means most 5x114 oem wheels will not fit.
I have Replica Cobra wheels on my 99 with a 89 axle. Hub hole worked fine, the specs are 18x9 +36 (offered in 18" and 19" diameter and 9" & 10" width and +36 or +24 offset) I run a 275/35/18. It's common to have to open up the bore on wheels when using them on the Taco and if I remember correctly the hubs require a 67.1 or bigger hole. (don't quote me though, I'd have to double check) These were a simple install with no milling required purchased new at Big O Tires.
Thanks, me too! Yes sir...I had no idea since the paper work and box didn't say, but I was schooled on FR500's over on CT.
I was going to pick up a set of them fr500's for a ok price. I should have done it cause it looks niceeeeee lol. all i need is a drop and im going to call it a day.
im trying to run some bullitt wheels and they bolt right on the front but i can barely turn without them hitting just about everything. i put a spacer on, i think 5/16th, and was able to turn full lock both ways. but the lug nuts barely have enough threads to grip on. how hard would it be to put longer studs on?
