Changed out front oil seals, installed clutch cancel. and some more cleaning.

 

put my new power steering tensioner pulley on. also put my new rims on from craigslist. drove down town lookin good lol.

 

Took a hammer to my wheel wells to get some more clearance. Seemed to work out pretty good.

 

Drove it to work with the new Weber and the linkage set up correctly. It's so much quieter now I can hear other stuff making weird noises. I guess it's both good and bad then, LOL!!!

Nice to have power AND being able to hear the radio better.

 

Got a few things done, check out my build thread.

 

-upgraded to some HIDs
-changed teh brake pads
-got one new tire for the rear
-almost crashed cause forgot to test the brakes when done

 

Well the other day.....I decided I'm not gonna bag my truck. I will, however, drop it down another inch and make into an old school mini build. I plan on buying another truck sometime down the road and will do air ride on that one.

 

Put the 4th coat of herculiner in my bed

I've got all the parts to put my bag setup back into the truck. I figured it was a perfect time to line the bed before I put it back. Since my bed is pretty much swiss cheese, I was able to get 4 full coats out of the gallon

 

Talked to my boy about trading my new trucks bed for his sfbd bed. Might do tht this weekend then I'll finish shavin it an finish welds inside an berliner it up

 

Didnt do nothing to truck but bought stock struts and a fender for the civic.
Planning on having link done saturday and bridge done sunday. Maybe Im hoping If i get back from Portland Friday night or early sat morn.

 

got a oem toyota security indicator plate. just need to wire it up.

 

went for a nice drive with my newly added sunroof opened up! loved every minute of it!

 

considering swapping drum shoes....

OMFG SOMEONE GET THIS
Tamiya America Item #23651SD | RC Toyota Hilux Scratch/Dent - Full Operation Finished

 

Put the grill and fenders back on... Starting to look like a truck again.

 

built gussets for my bottom bars

 

I removed the front fenders, hood, grill and bumper... And did a test fit of the new 4Runner bumper. Now I'm searching for a grill and headlights.

 

Hey did you take off the whole front end thats in your avatar pic? Plus pm me i might no where you can find the grille

 

did a BJ Flip. Ya baby!

 

added a factory fog light switch

 

Rain-X'd all the exterior windows. I initially did the front windshield only, just because. Clouds were moving in and I wanted to go to Autozone. on my way there, it lightly trickled and once I hit 40mph, all the water beads just flew off!

So I did it to all the other windows and did my sister's bf's Civic's front windshield.

I did buy another bottle of Zymol Cleaner Wax <3
Went to do some spots on my truck that needed it most. Did some on the bedside and mainly the roof of the truck.

I took my Meguiar's Ultimate Compound and went to town on my front fenders (Front fenders were rattle sprayed by me last year or two. Cherry red with some cheapo clear on top. Apparently the clear coat is ****. It was dull as fack.. as you can see in most pics. I hella buffed one area by hand and geez, BRIGHT SHINY RED. I may need to wet sand all of the fenders, polish, and THEN wax.)

Can't wait to do more detailing to my truck