I was wondering if I would be able to go 4 inches in the rear with 20's? I want it to be low and look good. I'm doing the static drop. Can't afford bags. lol.
Yes. I currently have a 3" block and a pulled middle leaf. You will have to trim the bump stops or get low profile stops. My best guess is that I achieved about a 4.5" drop. *edit* I am on 20x8.5s +40 offset with 235/30r20 tires.
should have no issues..... if you dig around a bit, i believe someone has gone low static wise on 20's. with 20's or most any wheel, offset and tire sizes will also be key points to keeping a good functional clearance. good luck and make sure to post some shots up of your results
Ok, thanks everyone. I'm so thankful there are people out there to help me. lol. I will surely be posting pics once I have everything on. Thanks again. Oh and what about a 225/35 will that work. on 8.5 wheels
They will work but my wheels are a little wider than the tread on my 235s. This prob helps a little for clearance but I would prefer at least 235s. Also on a side note, I am not sure my fronts would tuck at all if I still had my 2wd fenders.