my buddy wants me to put twin side draft carbs on where can i find some???


i would be interested in a straight drivers door with glass.

 

The bumper hes running is from a 1984 - 1988 2wd Toyota its a full chrome bumper and Im betting they probably either rigged the brackets or used the stock 84 - 88 2wd brackets, the bumper looks to be a reproduction part. You can find this part @ http://www2.partstrain.com/store/?N=11909+1725+4294965610+11921+9277 ( There is a full chrome & a gray primed to choose from - price does the talking )I had one on my 87' before I sold it to a fellow toyotaminis member ( you know who you are ) Justa word of advice if you get the bumper ( It is very likely aftermarket and the chrome plating is good, BUT, the back of the bumper should be either primed and painted or undercoated as itll rust fast if you don't. GREAT LOOK thou', love seeing it on this body style. . .

 

daily dragger- pm me your phone # and a good time to call and we can talk about your needs.



side drafts are cool, but REAL finicky. especially duals, they have to be tuned together with special tools and are not a entry level type thing. gas miliage will go to **** but the grin factor increases tremendously.

you would need:
carb/s = $2-800 each
intake= $1-300
cam= $100
upgraded spark= $150ish
new fuel pump and regulator= $1-200
exhaust=$2-300

to use them correctly

you could just slap em on but they wouldnt run right as they are a purely racing type of upgrade. driving in traffic sucks with a on/off switch gas pedal, and your tuning issues wont go away till you have a eng that can deal with 4x+ more fuel and air.

 

i run them on my truck so does backyard engineering. i run DUAL 44mm MIKUNIS and also DUAL 40mm WEBER's work like a dream. you will need a synchrometer tool and good ears. there are many books out there to help you with the tuning. I can also help you out if you need help. i have intakes if you need one. just let me know PM me. the intake is for a 20R motor and also got another for a 22r.


If you got $800.00 bucks ill give you almost new only 4 months old 45mm WEBERS ALL CHROME!!! YES 800 bucks for BOTH not EACH!

 

Yeah i thought it was something like that.

 

my cousin called me last night, his buddy had a built 22r in his 4x4 and he wrecked it so i might get that motor. where do you live shoNuff??

 

i also took the cluster in to work today i cleaned and chromed the needles... the gas and temp where way to hard to do. but i think it looks good. i also want to run LED lights instead of bulbs.

 

< ---- note location



ooooooh how did you chrome the needles?

 

wow duuurrr on my part lol we have a strange type of tape at work its see through but at the same time chrome.

 

what do you do at work?????

 

That's a steal for $250 bones!!

Have fun with the build! Kinda digging the hood scoop!

 

i build airplane parts... jeez i hate that hood scoop!!!

today i worked on the Toyota a little i need to do front brakes BAD the rotors are shot.do the rotors on toyota's have the bearing's built in or they the hub and the rotor is removable???


and it was nice out so i drove the s10

 

S-10 looks sharp, post some more pics when you can.

 

built 350 with a 5 speed



custom two piece drive line and new true dual exhaust.




DRAG THAT **** hahah

before

after

 

whats the bolt pattern for these old toyotas???

 

is that your oil pan split in pieces ?

 

no thats a slave cyl guard on s10 it hangs really low and thats the only way i could get rid of it lol

it dose look like a oil pan tho

 

ford 5-lug

5x4.5



watch the center bore on newer rims